Company News

Shower cubicles are bathroom products that consumers have loved in recent years, and many advantages of shower cubicles are also well known to consumers. With the development of product manufacturing technology, more types of shower cubicles have now appeared in our lives. So how to install the shower properly? Below, Shower Hinge Manufacturer will introduce you to the installation method of the shower, friends who are interested will come and find out!

1. Shower room installation—shower tray installation

The first thing to do is to prepare the necessary tools for the shower room installation. After that, install the basin parts of the shower basin according to the instructions, then place the basin in the installation position, and then adjust the basin to a horizontal position. During the installation process, ensure that there is no water in the basin, the hose can be retracted, The link between the basin and the floor drain is firm.

2. Bath room installation—aluminum material installation

After installation, a water test is required to ensure that the water is unobstructed. Next, use a pencil and a spirit level to determine the drilling position of the aluminum against the wall, and use an impact drill to make holes. Tap rubber particles into the hole and lock the aluminum bar to the wall with screws. Clamp the glass to the drilled hole of the bottom basin and fix it with screws. Then install the jacking pipe, find the corresponding position for drilling above the fixed glass, install the (straight / inclined) fixing base and connect the jacking pipe. Fix it to the top of the glass with an elbow sleeve.

3. Shower room installation—movable door installation

After installing the aluminum plate, clamp the glass where the basin is drilled, then install the fixing seat and connect the jack. Then fix the top of the glass firmly with an elbow sleeve. After the glass is installed, it is necessary to prepare a hidden turning of the movable door. For the hardware of the movable door, the hinge must be hidden in the hole reserved for the fixed door, and then the positions of the Shower Hinge and the axis are adjusted. Feel comfortable until closing.

Shower Hinge

4. Shower installation—make waterproof test quality

What we also need to do is to waterproof, and install suction bars or water-resistant strips on the side or below the glass as required. Close the joint between the aluminum and the wall, glass and the basin with silicone. The last step is to check whether each part is comfortable and smooth to use, and if any problems are found, they should be adjusted in time. After adjusting, tighten the corresponding screws to make the shower room stronger. And the finishing work is to snap the decorative aluminum strip into the wall-attached aluminum material to ensure its neat appearance.

5. Shower installation-finishing work

There are so many bathroom showers installed. The last step is also the most critical step. It is to confirm the various parts of the previous installation to confirm whether the oak shower room is secure, and whether the hinges are installed and used conveniently. Removal of garbage and residual dirt during the process.

I believe that through the introduction of Bottom Patch Supplier, you already know how to install the shower room. With people's pursuit of comfortable life, more and more consumers will choose shower room. The various shower booths launched by various sanitary ware manufacturers in response to consumer needs also made us feel the appeal of this product. Friends may wish to consider installing a shower booth when decorating.